Panasonic WV-CL834 - Manuel (Page 22)

2. Move the pointer to the character to be edited by
pressing ^ or . Then move the cursor to the
character area and select a new character,
3. Press El to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press El ■ All charac­
ters in the editing area disappear.
To determine the display position of the CAMERA
ID
1 . Move the cursor to POSl, and press
El
- The dis­
play shown below appears and the CAMERA ID
starts blinking.
Blinking
2.
3
.
Move the CAMERA ID to the desired position by
pressing
■
Press
El
to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen,
• The CAMERA ID moves faster if any of
is kept pressed for a second or
longer.
To return to the CAM SET UP menu
Move the cursor to RET and press
El
■ The CAM SET,
UP menu appears.
2. Light Control Setting (ALC/ELC)
You can select the mode for adjusting the tens iris.
The modes are as follows:
ALC: Select this mode when an auto iris lens (ALC
lens) is used with this camera.
ELC: Select this mode when a fixed iris lens or manual
iris lens is used with this camera.
** CAM SET UP * *
CAMERA ID OFF “1
ALC/ELC ' ALC “1
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW n
MOTION DBT OFF n
LENS DRIVE DC
SET UP ENABLE
-
20
-