Panasonic WV-CL834 - Manuel (Page 20)

——-- -------
f-------------------
•* CAM SET DP « * •• CAM SET UP •* *
CAMERA ID OFF 1 CAMERA ID OFF “1
ADC/ELC ALC n ■ ALC/ELC ALC “1
SHUTTER OFF SHUTTER OFF
AGC ON AGC ON -
sms UP OFF SENS UP OFF
SYNC INT f SYNC INT
WHITE BAX. ATW 1 WHITE BAL ATW n
MOTION DET OFF 1 MOTION DET OFF
LENS DRIVE DC LENS DRIVE DC
END ^ SET UP DISABLE END SET UP ENABLE ^
V___________
J
___________ J
Important Notice:
When the cursor is moved to END and the CAM
SET UP menu closed after changing the parame­
ters, the new values are stored in the EEPROM
(Electric Erasable and Programmable Read Only
Memory). These values remain valid until new val­
ues are stored, even if the power of the camera is
off.
• Editing the SPECIAL menu
To edit the SPECIAL menu (change settings), proceed
as for editing the CAM SET UP menu above.
Move the cursor to END after the words SET UP
ENABLE appear. Then press €3 and simultane­
ously for 2 seconds or longer.
The SPECIAL menu appears on the monitor. Select the
item to be changed and change the setting as
described for the CAM SET UP menu.
** SPECIAIi **
UP SIDE DOWH OFF
CHROMA GAIN _______ I____
AP GAIN ___ Z . . . .
PEDESTAI. .1.......
HUE .1.......
CAMERA RESET ^ PUSH 5W
RET END
-
18
-