Breville BFP800XL - Manuel (Page 12)

12
ASSEMBLING yOUR BREvILLE SOUS CHEF™
5. Place the processing lid onto the
processing bowl so the feed chute is
slightly right of the bowl handle and
the arrow graphics are aligned .
Holding the feed chute and pressing
down firmly at the same time, turn
the lid clockwise (as indicated by the
graphic) so the ‘Locking Tab’ on the
lid slots into the 'Interlocking Safety
Catch' on the handle. The lid should be
securely locked into position.
Fig. 5
NOTE
The food processor will not operate
unless both the processing bowl and
lid are correctly locked into position.
CAUTION
The processing blades (including
the mini bowl blade) and discs are
extremely sharp, handle with care at
all times.
6. Insert the power plug into a 110/120V
power outlet.
7. Press the POWER/OFF button to turn
your food processor on. The red light
will illuminate around the POWER /OFF
button to indicate that the processor is on.
Press the START/PAUSE button to switch
the motor on and operate continuously.
NOTE
The food processor will not start
unless the large food pusher is
inserted correctly into place.
Press the POWER/OFF button to
switch the motor off. When short bursts
of power are required, press the PULSE
button and hold down briefly, release,
then press again. The PULSE action
will automatically stop when the button
is released.
8. To set the timer, press the buttons
located to the left of the timing window.
Time will move up by 5 second intervals,
from 0 to 30 seconds. From 30 seconds
to 2 minutes the time will increase in 10
second intervals and from 2 minutes to
9.59 minutes the time will increases in
20 second intervals.
NOTE
If a time is not set, the timer
will automatically count up
during processing.
9. Once the time is set, press the
START/PAUSE button and the timer
will start to count down.
Ensure the large food pusher is inserted
correctly into place. The food processor
will not start until pusher is in place.
Once the timer has finished, the food
processor will stop and go into 'Standby'
mode. Three (3) beeps will sound to
indicate that the processing is complete.
The processor incorporates a 'Safety
Interlock System' that ensures the unit
will not start without the large food
pusher in position. Processing will stop
automatically, once the large food pusher
has been removed from the lid. The ‘Chute
Fill Max’ graphic indicates the maximum
volume of food to be placed in the chute
for the pusher to activate the unit.
BFP800XL_IB_B11_FA.indd 12 27/05/11 4:59 PM