Rockwell Automation 1756-Lx_Mx ControlLogix Controller and Memory Board Installation Instructions - Manuel (Page 17)

ControlLogix® Controller and Memory Board 17
Publication 1756-IN101J-EN-P - November 2004
Install the Memory Board
1. Place the memory board over the connector and slide the
memory board into the controller.
2. Pull the plastic back edge of the controller out slightly to clear
the tabs of the memory board.
3. Line up the connectors.
4. Place your hands on the boards over the connectors and
gently squeeze them together.
5. Make sure that the tabs on the memory board extend through
the slots on the plastic housing of the controller.
40018
memory board
slot
slot
tab
tab