Remove the side plate of the controller – Rockwell Automation 1756-Lx_Mx ControlLogix Controller and Memory Board Installation Instructions Manuel d'utilisation
Page 14
Advertising
14 ControlLogix® Controller and Memory Board
Publication
1756-IN101J-EN-P - November 2004
Remove the Side Plate of the Controller
1. Lay the controller on its side with the label facing up.
2. While wearing a grounding wriststrap, remove the two screws
that attach the side plate to the controller.
3. Rotate the side plate up and unhook it from the controller.
front of controller
40017
side plate
Advertising