Tweco 300 Auto-Cut - Manuel (Page 66)

Manual No. 0-4817 Auto-Cut 300 5-2 MAINTENANCE
5.03 Water Filter Cleaning Procedure
NOTE This procedure is only required in installations using water as a shield.
Clean the filter as follows:
1. Disconnect system from main input power.
2. Unscrew and remove the filter bowl by hand. Be sure to keep the gasket.
3. Remove and clean the filter. Re-install the bowl, tightening it by hand. Be sure the gasket is in place.
4. Turn the system on and check for leaks.
Art # A-04936
Water Filter
Cup
Screen
Gasket
Water Filter Assembly