10 connect cnc cable, 10 connect cnc cable -14 – Tweco 300 Auto-Cut Manuel d'utilisation
Page 38
Advertising
Manual No. 0-4817 Auto-Cut 300
3-14
INSTALLATION
3.10 Connect CNC Cable
1. Connect one end of the CNC cable to the power supply receptacle marked ‘CNC’.
2. Connect the other end of the cable to the CNC device
.
3. The CNC cable shield must be attached to ground at the CNC end of the cable. Do not ground to the
Plasma Power Supply.
RETURN
SUPPLY
RETURN
SUPPLY
Art # A-04829
To CNC
Advertising