Pioneer DCS-580 - Manuel (Page 47)

Additional information 11
47
En
English
Français
Deutsch
Nederlands
Italiano
Español
DVD/CD/Video CD player
SND.DEMO shows in
the display and the unit
can’t be controlled. • Press and hold  (stop) on the front panel for about five seconds. The disc tray
ejects automatically to indicate the Sound Demo mode is disabled.
Problem Remedy
Problem Remedy
The disc is ejected
automatically after
loading. • Clean the disc and align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on the
player, the disc cannot be used (see DVD Video regions on page 43). In this
instance, the following message appears on screen:
Incompatible disc region
number/Can’t play disc.
• Allow time for any condensation inside the player to evaporate. Avoid using the
player near an air-conditioning unit.
Playback not possible. • If the disc is loaded upside down, reload the disc with label side face up.
Picture playback stops
and buttons cannot be
used. • Press  (stop), then  (play) to start playback again.
• Switch the power off once, then on again using the front panel
 STANDBY/ON button.
Settings are canceled. • When the power is cut, settings will be canceled.
No picture/No color. • Check that connections are correct and that plugs are inserted fully.
• Check the manual of the TV/monitor to make sure the settings are correct.
Screen is stretched or
aspect doesn’t change. • The TV Screen setting is incorrect. Set the TV Screen option to match the TV/
monitor you’re using (see Video Output settings on page 30).
When recorded on a
VCR or passed through
an AV selector, there is
disturbance in the
playback picture. • This system uses copy-protection technology which may prevent recording or
cause picture problems when connected through a VCR or AV selector. This is not
a malfunction.
Picture disturbance
during playback or dark. • This player is compatible with Macro-Vision System copy guard. Some discs
include a copy prevention signal, and when this type of disc is played back, stripes
etc., may appear on some sections of the picture depending on the TV. This is not a
malfunction.
• Discs respond differently to particular player functions. This may result in the
screen becoming black for a brief instant or shaking slightly when the function is
executed. These problems are largely due to differences between discs and disc
content and are not malfunctions of this player.
Noticeable difference in
DVD and CD volume. • DVDs and CDs use different recording methods. This is not a malfunction.
CD-ROM disc is not
recognized. • Make sure that the CD-ROM was recorded using the ISO 9660 disc format. See
Disc compatibility table on page 41 for more on disc compatibility.
DVD-ROM disc is not
recognized. • Make sure that the DVD-ROM was recorded using the UDF bridge format. See
Disc compatibility table on page 41 for more on disc compatibility.
DCS-575_580DVD_EN.book 47 ページ ２００８年２月２９日 金曜日 午後５時４３分