MaxPower Corp Gamatronic Power+ M100 - Manuel (Page 4)

Gamatronic Electronic Industries Ltd.
iv POWER+ 3x208 V User Guide, Release 2.1
S
AFETY
C
ONSIDERATIONS
The POWER+ UPS system is designed for industrial applications and harsh
environments. Nevertheless the POWER+ UPS system is a sophisticated power
system and should be handled with appropriate care, following these guidelines.
Do’s
• READ THIS MANUAL CAREFULLY before starting installation and operation
of the UPS.
• SAVE THESE INSTRUCTIONS. This manual contains important instructions
that must be followed during installation and maintenance of the UPS and
batteries.
• REVIEW THE SAFETY PRECAUTIONS described below to avoid injury to
users or damaging equipment.
• All power connections must be completed by a licensed electrician who is
experienced in wiring this type of equipment, and who is knowledgeable
about all federal, state, and local electrical codes and regulations. Improper
wiring may cause damage to the equipment or injury to personnel.
• Pay attention to the warning signs, labels and marks on the unit. A warning
sign signals the presence of a possibly serious, life-threatening condition.
• Keep the surroundings clean, uncluttered and free from excess moisture.
• Allow only qualified technicians to service the UPS. There are no user-
serviceable components. Do not try to repair it yourself!
• Use the UPS only for its intended purpose.
CAUTION - WARNING - RISK OF LETHAL ELECTRIC SHOCK:
The battery drawer contains a series of 12-Volt batteries that
provide high voltage and energy in the UPS body even when the
UPS is not connected to the ac input. Appropriate precautions
should be taken during installation, inspection and servicing.
CAUTION - WARNING - RISK OF LETHAL ELECTRIC SHOCK:
The UPS receives power from more than one source.
Disconnection of all of the ac sources and the dc source is
required to de-energize this unit before servicing.
ATTENTION - AVERTISSEMENT - RISQUE DE DÉCHARGE ÉLECTRIQUE
MORTELLE :
Le tiroir de batterie contient une série de batteries 12-Volt qui
fournissent la haute tension et l'énergie dans le corps D'UPS
même lorsque L'UPS n'est pas relié à l'entrée à A.C. Des
précautions appropriées devraient être prises pendant
l'installation, l'inspection et l'entretien.