Jenn-Air BUILT-IN ELECTRIC CONVECTION OVEN JMW3430 - Manuel (Page 22)

22
For best results when baking cakes on 2 racks, use racks 2o and
4r for baking. Place the cakes on the racks as shown.
To Use Convect Bake Rapid Preheat:
1. Touch MODES to move to the Modes menu.
2. From the Modes menu, touch CONVECT BAKE RAPID
PREHEAT.
3. After touching Convect Bake Rapid Preheat, you will move to
the Temperature screen, or you may touch the Temperature
tab to move to the Temperature screen.
Use the slider to enter a desired cooking temperature or
touch the -5°F (-1°C) or +5°F (+1°C) buttons. The temperature
must be between 170°F (77°C) and 550°F (288°C).
4. Touch START to begin preheating oven.
OR
5. If a programmed cook time is desired, touch TIMER NOT SET
to enter the Cook Time screen. Enter a cooking length using
the on-screen number keyboard to set a timer to alert you
when cooking ends. The time length may not exceed
12:00:00. The oven will turn off when the cook time expires.
6. (Optional) To keep food warm after a programmed cook time
ends, turn Keep Warm ON from the Cook Time screen. See
the “Keep Warm™ Option” section for additional information.
7. (Optional) To set a delay start with a cook time, touch the
TIMER NOT SET/COOK TIME Screen and enter desired cook
time. Select Delay Start, set desired start time and touch SET
DELAY. A second way to set a Delay Start is to touch DELAY
START from the Temperature tab, set desired time and touch
SET DELAY. See “Delay Start” section for additional
information.
8. Touch START to begin preheating oven or to start the Delay
Timer.
9. Place food in the oven when preheat signal sounds. The
screen will also prompt you when to insert food. If a delay
start is programmed, place food in oven when setting the
mode.
NOTE: Do not use Delay Start for items that require a
preheated oven, such as cakes, cookies and breads. If food
is in the oven during preheat, it may become overcooked.
10. When the cook timer ends, you can start the Keep Warm
cycle if not preset, Add More Time or Cancel the timer. To add
more time, touch ADD MORE TIME or EXIT TIMER and then
set timer. Enter desired time and select OK.
11. When the cycle is complete, touch CANCEL (CANCEL
UPPER or CANCEL LOWER on double models) to turn off the
oven.
Convect Broil
During convection broiling, the broil element will cycle on and off
in intervals to maintain oven temperature, while the fan circulates
the hot air.
The oven door must be close for the broil element to operate.
The temperature is preset at 550°F (288°C), but can be changed
to a different temperature. Cooking times will vary depending on
the rack position and temperature and may need to be adjusted.
The fans turn off immediately when door is opened and turn on
again immediately when door is closed. The broil element will
turn off approximately 30 seconds after the door is opened. It will
turn on again approximately 30 seconds after the door is closed.
To Use Convection Broil:
Before convection broiling, see “Broil” section for general broiling
guidelines.
1. Place food in oven and close door.
2. Touch MODES tab to move to the Modes menu.
3. Touch CONVECT BROIL.
4. After touching Convect Broil, you will move to the
Temperature screen, or you may touch the Temperature tab
to move to the Temperature screen.
Use the slider to enter a desired cooking temperature or
touch the -5°F (-1°C) or +5°F (+1°C) buttons. The temperature
must be between 450ºF (232ºC) and 550ºF (288ºC).
5. Touch START to begin cooking.
OR
6. If a programmed cook time is desired, touch TIMER NOT SET
to enter the Cook Time screen. Enter a cooking length using
the on-screen number keyboard to set a timer to alert you
when cooking ends. The time length may not exceed
12:00:00. The oven will turn off when the cook time expires.
7. (Optional) To keep food warm after a programmed cook time
ends, turn Keep Warm ON from the Cook Time screen. See
the “Keep Warm™ Option” section for additional information.
8. (Optional) To set a delay start with a cook time, touch the
TIMER NOT SET/COOK TIME Screen and enter desired cook
time. Select Delay Start, set desired start time and touch SET
DELAY. A second way to set a Delay Start is to touch DELAY
START from the Temperature tab, set desired time and touch
SET DELAY. See “Delay Start” section for additional
information.
9. Touch START to begin cooking or to start the Delay Timer.
10. When the timer ends, you can start the Keep Warm cycle,
Add More Time or Cancel The Timer. To add more time, touch
ADD MORE TIME or EXIT TIMER and then set timer. Enter
desired time and select OK.
11. Touch CANCEL (CANCEL UPPER or CANCEL LOWER on
double models) to turn off the oven.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
A. Broil element
B. Convection fans
B
A