Manitowoc Ice RF - Manuel (Page 15)

Installation Instructions Section 2
15 Part Number 000007644 3/11
Installation Check List
All Manitowoc ice machines are factory-operated and adjusted before shipment. Adjustments and maintenance
procedures outlined in this manual are the responsibility of the owner/operator and are not covered by the warranty.


Is the Ice Machine level?

Is the ice machine and adapter (when used)
secured to the dispenser?

Have all of the electrical and water
connections been made?

Has the supply voltage been tested and
checked against the rating on the nameplate?

Is there proper clearance around the ice
machine for air circulation?

Is the ice machine grounded and polarity
correct?

Has the ice machine been installed where
ambient temperatures will remain in the range
of 50° - 100°F (14.4° - 37.8°C)?

Has the ice machine been installed where the
incoming water temperature will remain in the
range of 50° - 90°F (14.4° - 32.2°C)?

Is there a separate drain for the water-cooled
condenser?

Is there a separate drain for the dispenser?

Is the ice making water turned on?

Are all electrical leads free from contact with
refrigeration lines and moving equipment?

Has the owner/operator been instructed
regarding maintenance and the use of
Manitowoc Cleaner and Sanitizer?

Has the owner/operator completed the
warranty registration card?

Has the ice machine and bin been sanitized?

Is the rocker switch set to ON?