Creating custom equalizer settings, Clearing stored equalizer settings, Recording – Sony TA-E9000ES Manuel d'utilisation
Page 38: Recording on an audio tape or minidisc
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
3"
«
O
■ o
ID
O
3
VI
Creating Custom Equalizer
Settings
Any cli.inges \'ou mnkc to tlu' prosot oqiiali/ors (EQ
I’Kl'SEl' I '5) an.' ston'd aiitomaticalh'.
1
Press EQUALIZER BANK repeatedly to select the
equalizer you want to adjust (EQ PRESET 1 ~5).
2
Press MAIN MENU repeatedly to display
"<EQUALIZER>".
3
Turn MENU to select the desired parameter, then
turn +/- to adjust.
Thest? parameters let vou adjust the sound of each
speaker individually (see page 32).
The adjustments are stored automaticallv.
? You can turn off the equalization without erasing the
equalizer
Press the EQUALIZER BANK repeatedly to select "EQUALIZER
OFF".
Clearing Stored Equalizer Settings
1
Press EQUALIZER BANK repeatedly to select the
equalizer you want to clear (EQ PRESET 1-5).
2
Press MAIN MENU repeatedly to display
"<EQUALIZER>".
3
Turn MENU tordisplay "<PRESET x clear [NO]>" ("x"
is the number of the current equalizer preset).
4
Turn
+/-
to display "<PRESET x clear [YES]>".
A few seconds later, "Are you sure?" is displayed.
5
Once again, turn
+/-
to display "[YES]".
A few seconds later, "PRESET x CLEARED !" is
displayed and the contents of the selected equalizer
bank are restored to the factory presets.
Recording
^'our control amplifier makes it easy to record to and from
the components connected to it. You don't have to
connect the playback and recording components directly
to each other; once you select a program source on the
control amplifier, you can record and edit as you
normally
would using the controls on each component.
Before you begin, make sure you'\’e connected all
components properly.
INPUT SELECTOR
Video signal flow
Recording on an audio tape or MiniDisc
You can record on a cassette tape or MiniDisc using the
control amplifier. See the instruction manual of your tape
deck or MD deck if you need help.
1
Turn INPUT SELECTOR to select the component to
be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD player.
3
Insert a blank tape or MD into the recording deck
and adjust the recording level, if necessary.
4
start recording on the recording deck, thert Start
playback on the playback component.
Notes
• You cannot record a digital audio signal using a component
connected to the analog TAPE REC OUT or MD/DAT REC
OUT jacks. To record a digital audio signal, connect a digital
component to the MD/DAT OPTICAL OUT jack.
• Sound adjustments do not affect the signal output from the
TAPE REC OUT or MD/DAT REC OUT jacks.
4Q0H