Sony TA-E9000ES - Manuel (Page 12)

o
n
fii
r*
5‘
3
ai
;;
VI
OI
3
a
n
OI
vi_
ñ‘
O
■ O
10
o
3
VI
g] AUDIO SPLIT button
Press to select and play another audio source in
combination with the selected component.
1 Turn INPUT SELECTOR to select a video component.
2 Press AUDIO SPLIT repeatedly to select a different audio
source or press AUDIO SPLIT once to display the current
settings and turn +/- to select the different audio source.
The display switches to "V:XXX A:XXX" to show both the
video (V:XXX) and audio (A:XXX) sources.
To cancel AUDIO SPLIT
Press and hold AUDIO SPLIT for at least two seconds.
9 Input indicators
Normally, the indicator above the selected input lights
orange. However, when AUDIO SPLIT is used to select a
different audio source, the video input lights green and the
audio input lights orange.
Note
When using AUDIO SPLIT, the input (digital/analog) of the
selected audio source is automatically set to "AUTO" (see
"in DIGITAL/ANALOG button" for details).
DIGITAL/ANALOG button
Press to select either digital or analog audio signals for
your digital components (DVD, LD, TV (TV/DBS), CD
and MD/DAT).
Each press switches the input of the currently selected
component as follows:
Select To
AUTO Give priority to digital signals
when there are both digital and
analog connections. If there are
no digital signals, analog is
selected. Priority is :
© AC-3 RF
@ DIGITAL (OPTICAL) or
(COAXIAL)
©ANALOG
ANALOG Specify the analog audio signals
input to the AUDIO IN (L and R)
jacks.
DIGITAL (OPTICAL) Specify the digital audio signals
input to the DIGITAL OPTICAL
IN jacks.
DIGITAL (COAXIAL) Specify the digital audio signals
input to the DIGITAL COAXIAL
IN jack. (CD, DVD, LDonly)
AC-3 RF Specify the radio frequency
signals input to the AC-3 RF IN
jack. (LD only)
The DIGITAL/ANALOG button lights up when the
INPUT SELECTOR is used to select a component
whose input is set to something other than "AUTO".
13 QB