Sony TA-E9000ES - Manuel (Page 21)

Rear speaker height*
REAR RIGHT [LOW]
Initial sotting: LOW
This parameter lets \ on spedh' the height ot your rear
speakers for proper implementation of the Digital Cinema
Sciund "VIRTUAL" sound fields. Refer to the illustration
below.
• Select "LOW" if the location of your rear speakers
corresponds to section ©.
• Select "HIGH" if the location of your rear speakers
corresponds to section ©.
This setting only effects the "VIRTUAL" sound fields.
This parameter is not available when "Rear speaker
size" is set to "NO".
? About the rear speaker position and rear speaker height
Vlu'so soilings are designed spivifically for implementation of the
Digital Cinema Sound "VIRTUAL" .srumd fields.
The rear speaker position parameter allows \ on to specify one of
thav possible horizontal positions. The rear speaker height
parameter allows you to specifc' one of two possible height
positions. Select the position and height combination that comes
closest to the actual position of your rear speakers.
■ Front speaker roll off frequency
FRONT SP > XXXHz
Initial setting : > 80 Hz
This setting lets you select the roll off frequency for the
low cut filter of the front (left and right) speakers.
• The bass frequencies lower than the cut off frequency
are divided by the bass redirection circuitry and output
from the sub woofer or other "LARGE" speakers. In
order to prevent clipping, frequencies below the cut off
frequency are not output from the front speakers.
■ Center speaker roll off frequency
CENTER SP > XXXHz
Initial setting : > 80 Hz
This setting lets you select the roll off frequency for the
low cut filter of the center speaker.
• The bass frequencies lower than the cut off frequency
are divided by the bass redirection circuitry and output
from the sub woofer or other "LARGE" speakers. In
order to prevent clipping, frequencies below the cut off
frequency are not output from the center speaker.
m
o‘
»<,
5'
m
vt
c
3
C
3
a
vt
o
c
3
a
21 GB