Breville THE BARISTA EXPRESS BES860XL Manuel d'utilisation

Page 34

Advertising
background image

PERFECTING YOUR SKILLS - Single Wall Filters

SINGLE WALL FILTERS FOR ASPIRING

BARISTAS

Experiment with grind size, grind amount and

tamp

The Barista Express is supplied with two Single

Wall Filters - 1 x single shot and 1 x double

shot. These filters provide no additional slowing

of the water flow rate, hence experimentation

with the grind size, grind amount and tamp

force is required to achieve favorable results.

These filters are suited to both pre-ground

vacuum packed espresso as well as beans

ground fresh in the integrated grinder.

A great espresso is a balance of main flavor

elements: acidity, aroma, bitterness, body,

nuttiness, and sharpness. By using the Single

Wall Filters you are free to explore the world of

espresso by adjusting grind, grind amount and

tamp to extract a rich variety of flavors.

STEP 2 - PRE-WARMING THE CUPS

This will help maintain the espresso’s optimal

temperature when brewed into the cups.

The Cup Warming Plate will start to warm as

s

the machine heats.

Run hot water from the group head without

s

the portafilter inserted by holding down the

single shot button on the front, right hand

side of the machine, then place the cups on

the warming tray.

NOTE: Check the water level before use

and replace the water daily. The
water tank should be refilled with
fresh, cold tap water before each
use. Do not use mineral or distilled
water or any other liquid.

Ensure the charcoal water filter is securely

s

fitted inside the tank. Refer to ‘Care and

Cleaning’ on page 49, ‘Installing the Filter in

the Water Tank’

Fill the water tank with cold tap water to

s

the maximum mark on the side of the tank

and slide the water tank carefully back into

position at the back of the machine.

Plug the power cord into a 110/120V power

s

outlet.

Press the POWER button to ‘On’, the

s

POWER button surround will flash while

the machine is heating. When the correct

temperature has been reached, all the button

surrounds on the control panel will illuminate.

STEP 1 – FILLING THE WATER TANK

34

Advertising