Blodgett MT3855G-G - Manuel (Page 7)

Introduction
3
Oven Components
Folding Conveyor Assembly --- stainless steel
chain link (conveyor) belt and support that carries
product through the oven.
Control Box --- contains electrical wiring, cooling
fan, drive motor and drive chain.
Drive Motor --- provides power to move the con-
veyor belt. Located inside the control box.
Drive Chain --- connects the drive motor sprocket
to the drive side of the conveyor assembly. Lo-
cated inside the control box.
Baking Chamber --- products pass through the
baking chamber on the conveyor belt for cooking.
Nozzles --- distribute heated air to the bottom of
the baking chamber. Located inside the oven, un-
der the conveyor belt.
Nozzle Hold-Down Bracket --- holds the front end
of the nozzles in position. Located inside the oven.
Return Air Diverters --- divert return air from bak-
ing chamber back to the combustion chamber.
Ensure even baking throughout oven. Located in-
side the oven, beneath the nozzles.
End Plugs --- keep heat in the baking chamber.
Located on each end above and below the con-
veyor belt.
Crumb Pan --- catches crumbs from products on
the conveyor. Located under conveyor belt at both
ends of the baking chamber.
Pull Down Door --- open for auxiliary product in-
sertion.
Air Flow Plates (2, drive and idle sides) --- dis-
tribute heated air to top of baking chamber. Lo-
cated inside of oven at the top of baking chamber.
Emergency Shut Down Switch --- allows user to
turn oven and conveyor off in an emergency. Do
not use for general shut down.
Folding Conveyor
Assembly
Air Flow
Plate
Remote
Computer
Control
Handle for
Pull Down Door
Crumb
Pan
Product Stop
Control
Box
Return Air
Diverters
Nozzles
Upper
End Plug
Lower
End Plug
Figure 2