Operation, Cooking computer – Blodgett MT3855G-G Manuel d'utilisation

Page 21

Advertising
background image

Operation

17

Cooking Computer

OPERATION
To turn the oven on:
1. Turn the manual gas valve to ON. (Gas models

only)

2. Press and hold the ON/OFF key (2). The dis-

play reads

OFF when the oven is idle.

3. The STATUS LAMPS (9) light. The fans begin

to run. The heat rises to the temperature set-

ting stored in the computer’s memory. The

conveyor belt begins to travel at the speed

stored in memory.

4. The display flashes

WAIT

D

LOW

D

SET

D

TIME

D

mmss until the oven reaches the pro-

grammed bake temperature.

5. The display reads

READY and the HEAT lamp

(9) goes out. The oven is now ready to accept

product.

To view the cook time setting:
1. Press the TIME key (7). The LED on the key

lights and the display flashes

SET

D

TIME

D

mmss.

To display the actual oven temperature:
1. Press the ACT TEMP key (6). The LED on the

key lights and the display flashes

ACTUAL

D

nnn_F.

To view the temperature set point:
1. Press the SET TEMP key (5). The LED on the

key lights and the display flashes

SET

D

TEMP

D

nnn_F.

To turn the oven off:
1. Press the ON/OFF key (2). The oven is

equipped with a cool-down feature for motor

shaft and bearing protection. This enables the

blower motor(s) to run regardless of the con-

troller status. The blower(s) continue to run

until the oven cools to a safe temperature.

DISPLAY INFORMATION
WAIT

D

LOW --- the present oven temperature is

lower than the set point temperature. When the

oven reaches the set point temperature the dis-

play changes to

READY.

READY --- the oven is ready to accept product.
SET

D

TIME

D

mmss --- the current cook time set-

ting.
HIGH

D

TEMP --- the temperature is above the set

point. Wait until the display reads ready before

loading product.
HIGH

D

TEMP

D

LIMIT ---the oven temperature ex-

ceeds the high limit. The Over Temperature Alarm

buzzer sounds. Shut the oven off and wait for the

unit to cool down.
HIGH

D

TEMP

D

PANEL --- the control area reaches

an excessive temperature. Shut the oven off and

wait for the unit to cool down.
PROBE

D

OPEN

D

PROBE

D

SHORT --- the tempera-

ture sensor has failed. The Alarm buzzer sounds.

Shut the oven off and contact a service represen-

tative.

Advertising