Installation - montage – Philips Saeco Odea Machine espresso Super Automatique Manuel d'utilisation

Page 10

Advertising
background image

9

1

2

3

4

5

6

INSTALLATION - MONTAGE

STARTING THE MACHINE - MISE EN MARCHE DE LA MACHINE

Make sure the power button is not pressed and the machine is turned off. Check the machine features on

the label on the bottom of the appliance.
S’assurer que l’interrupteur général ne soit pas actionné. Vérifi er les caractéristiques de la machine

reportées sur la plaque signalétique située sur la partie inférieure.

Lift the lid off the coffee bean

hopper.
Soulever le couvercle du

réservoir à café en grains.

Fill the container with coffee

beans. Close the lid placing it

correctly on the hopper.
Remplir le réservoir à café

en grains Fermer à l’aide du

couvercle en le positionnant

correctement sur le réservoir à

café.

Fill the tank with fresh drinking

water up to the MAX level.

Re-insert the tank.
Remplir le réservoir avec de

l’eau fraîche potable, jusqu’au

niveau MAX indiqué. Réinsérer

le réservoir.

Firmly push down the power

button to turn on the machine.

The machine performs a self-

test.
Appuyer à fond sur l’interrupteur

général pour allumer la

machine. L’appareil effectue

une analyse des fonctions.

Insert the plug into the socket

located on the back of the

machine and insert the other

end into a power outlet with

suitable current.
Brancher la fi che sur la prise

située au dos de l’appareil.

Brancher l’autre extrémité du

câble sur une prise de courant

appropriée.

Remove the water tank. It is

recommended to install the water

fi lter as described on page 12.
Retirer le réservoir à eau. Il est

conseillé d’installer le fi ltre à eau

Intenza (Voir page 12).

Advertising