Roland ARX-01 - Manuel (Page 65)

65
47: TIME SKIP DELAY
A delay that changes the delay time in stair-step fashion.
fig.MFX47
Parameter Value Description
Delay #1 0–4000 ms, note Adjusts the time until the delay is heard.
Skip Rate
0.05–10.0 Hz,
note Frequency at which the delay time will
change
Feedback #2 -98– +98 %
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-
) settings invert the phase.
Acceleration #3 0–15
Adjusts the time over which the Delay
Time changes from the current setting to
its specified new setting.
HF Damp 200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don’t want to filter out any high frequen-
cies, set this parameter to BYPASS.
Pan L64–63R Stereo location of the delay
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance #4
D100:0W–
D0:100W Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
L in
R in
L out
R out
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
2-Band
EQ
Feedback
Time Skip Delay
ARX-01_e.book 65 ページ ２００８年２月１９日 火曜日 午後４時７分