Roland ARX-01 - Manuel (Page 20)

20
Saving a kit (on the Fantom-G)
A kit you’ve created is temporary; it will be lost if you select a
different kit. If you want to save the kit you’ve edited, proceed as
follows.
1. Press [WRITE] on the Fantom-G.
2. Assign a name to the kit.
For details on how to assign a name, refer to the Fantom-G
owner’s manual.
fig.01-101.eps
3. When you’ve finished assigning the name, press [F8 (OK)]
button.
4. Select a kit number, and press [F8 (WRITE)] button.
5. When the confirmation screen appears, press [F7 (OK)] button
to save the kit.
ARX-01_e.book 20 ページ ２００８年２月１９日 火曜日 午後４時７分