Flam/roll settings (tone/flam/roll screen) – Roland ARX-01 Manuel d'utilisation

Page 24

Advertising
background image

24

Flam/Roll settings
(Tone/Flam/Roll screen)

fig.02-002.eps

Here you can apply a

fram or

roll effect to each tone.

You can use note velocity to switch the flam or roll effect on/off.

Flam-related parameters

fig.flam.eps

For details on the “note” that can be selected for the Rate
parameter, refer to

“About Note”

(p. 67)

Parameter

Value

Description

Flam/Roll Velocity
Threshold

0–127

Boundary between Upper and Lower

Flam/Roll Type
Upper

OFF,
FLAM,
ROLL

Selects the way in which the tone will
sound when the note velocity is above the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.

Flam/Roll Type
Lower

OFF,
FLAM,
ROLL

Selects the way in which the tone will
sound when the note velocity is below the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.

Parameter

Value

Description

Rate

1–100,
note

Time interval between flam notes

Offset

-100–
+100

Difference in strength between note and flam note(s)

Flam Time

1–16

Number of flam notes

Time Ve-
locity Sens

-100–
+100

Change in the number of flam notes in response to
velocity. With a positive (+) setting, velocity will in-
crease the number of flam notes; with a negative set-
ting (-), velocity will decrease the number of flam
notes.

Feel

0–32

Amount of random change in the strength of flam
notes and their time interval

Time

V

elocity

Note On

Last Note

(Velocity = Note On)

Rate

Offset

Rate

ARX-01_e.book 24 ページ 2008年2月19日 火曜日 午後4時7分

Advertising
Ce manuel est liée aux produits suivants: