Roland ARX-01 - Manuel (Page 19)

19
Creating a Kit
fig.01-004.eps
The basic screen shows the KIT NAME, twenty-four indicators that
represent the
Current Tone (p. 21), and the group faders.
When the basic screen is displayed, you can also assign a name to
the kit and save it.
Selecting a kit
Move the cursor to KIT NAME and change the value to select a kit
(001–050).
Group Fader
Eight faders are shown in the basic screen of the ARX-01. These are
called the Group Faders.
You can divide the twenty-four tones among eight groups, and use
these group faders to adjust the volume of the groups. To assign
each tone to a group, use the Tone screen’s Fader Group settings (p.
21).
About this manual
• The screen images used in this manual are taken from a Fantom-G with the ARX-01 installed. The various procedures described also
assume that you are using the ARX-01 installed in a Fantom-G.
• For details on how to move the cursor or edit a value, refer to the owner’s manual for the device in which you’ve actually installed the
ARX-01.
The basic screen
ARX-01_e.book 19 ページ ２００８年２月１９日 火曜日 午後４時７分