Roland ARX-01 - Manuel (Page 54)

54
31: LOFI COMPRESS (Lo-Fi Compress)
This is an effect that intentionally degrades the sound quality for creative
purposes.
fig.MFX31
32: LOFI RADIO (Lo-Fi Radio)
In addition to a Lo-Fi effect, this effect also generates various types of noise,
such as radio noise or disk noise.
fig.MFX32
Parameter Value Description
Pre Filter
Type #2
1–6
Selects the type of filter applied to the
sound before it passes through the Lo-Fi
effect.
LoFi Type #1 1–9
Degrades the sound quality. The sound
quality grows poorer as this value is in-
creased.
Post Filter
Type
OFF, LPF, HPF
Type of filter
OFF: no filter is used
LPF: cuts the frequency range above the Cutoff
HPF: cuts the frequency range below the Cutoff
Post Filter Cutoff 200–8000 Hz Basic frequency of the Post Filter
Balance #3
D100:0W–
D0:100W Volume balance between the direct
sound (D) and the effect sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Compressor
Lo-Fi
Lo-Fi
Compressor
Parameter Value Description
LoFi Type #1 1–9
Degrades the sound quality. The sound
quality grows poorer as this value is in-
creased.
Post Flter Type OFF, LPF, HPF
Type of filter
OFF: no filter is used
LPF: cuts the frequency range above the
Cutoff
HPF: cuts the frequency range below the
Cutoff
Post Filter Cutoff 200–8000 Hz Basic frequency of the Post Filter
Radio Detune #2 0–127
Simulates the tuning noise of a radio. As
this value is raised, the tuning drifts fur-
ther.
Radio Noise Level
#3
0–127 Volume of the radio noise
Balance #4
D100:0W–
D0:100W Volume balance between the direct
sound (D) and the effect sound (W)
Level 0–127 Output level
R in R out
L in L out
Lo-Fi
Lo-Fi
Radio
ARX-01_e.book 54 ページ ２００８年２月１９日 火曜日 午後４時７分