Roland ARX-01 - Manuel (Page 35)

35
Each multi-effect has “Control Assign” parameters. These indicate the
parameters that can be controlled via
“Multi-effect control (Effects/MFX
Ctrl screen)” (p. 29).
For details on the “note” that can be selected for some parameter, refer
to
“About Note” (p. 67)
In the parameter list below, an indication of “#1”–“#4” follows the
name of parameters that are selected for Control Assign by default.
01: STEREO EQ (Stereo Equalizer)
This is a four-band stereo equalizer (low, mid x 2, high).
fig.MFX01
Multi-Effects Parameters
Parameter Value Description
Low Freq 200, 400 Hz Frequency of the low range
Low Gain #1 -15– +15 dB Gain of the low frequency range
High Freq
2000, 4000,
8000 Hz
Frequency of the high range
High Gain #4 -15– +15 dB Gain of the high frequency range
Mid1 Freq 200–8000 Hz Frequency of Middle Range 1
Mid1 Q
0.5, 1.0, 2.0,
4.0, 8.0
Width of Middle Range 1
Select a higher Q value to narrow Mid-
dle Range 1.
Mid1 Gain #2 -15– +15 dB Gain of Middle Range 1
Mid2 Freq 200–8000 Hz Frequency of Middle Range 2
Mid2 Q
0.5, 1.0, 2.0, 4.0,
8.0
Width of Middle Range 2
Select a higher Q value to narrow Mid-
dle Range 2.
Mid2 Gain #3 -15– +15 dB Gain of Middle Range 2
Level 0–127 Output level
L in
R in
L out
R out
4-Band EQ
4-Band EQ
ARX-01_e.book 35 ページ ２００８年２月１９日 火曜日 午後４時７分