Maytag Commercial Laundry 27 Inch Commercial Electric Stack Installation Guide - Manuel (Page 5)

5
Tools Needed:
8" (200 mm) 8" (200 mm) or 10" (250 mm) Flat-blade screwdriver Phillips screwdriver
or 10" (250 mm) Adjustable wrench
Pipe wrench that opens to 1" (25 mm)
Torx T-20 ®† security 1" (25 mm) Hex-head 5⁄16" (8 mm) Socket wrench Pliers (that open to
screwdriver or bit socket wrench 1 9 /
16
" [39 mm])
Level Utility knife 1/4" (6 mm) Nut driver 27" (686 mm)
Wood block
Caulk gun and caulk Vent clamps Pipe-joint compound Putty knife
(for installing new exhaust vent) suitable for gas type
Flashlight (optional) 1" (25 mm) Ruler or measuring tape
Open-end wrenches
TOOLS & PARTS
†® TORX and T-20 are registered trademarks of Acument Intellectual Properties, LLC.
Parts Supplied:
Security cotter pins (2)