Tweco 100 Auto-Cut - Manuel (Page 23)

Manual 0-4764 2-7 SPECIFICATIONS
C. Torch Parts (Generic Parts Shown)
Cartridge Shield Cup
Art # A-04741
Electrode Tip
Plasma Gas
Distributor
Shield Gas
Distributor
Shield Cap
D. Parts - In - Place (PIP)
The torch is designed for use with a power supply which senses coolant return flow to confirm that torch
parts are in place. If coolant return flow to the power supply is absent or insufficient the power supply will
not provide power to the torch. Coolant leakage from the torch also indicates that torch parts are absent
or installed improperly.
E. Type Cooling
Combination of gas stream through torch and liquid cooling.
F. XT TM -301 Torch Data (with AutoCut TM 100 Power Supply)
XT TM -301 Torch Ratings
(when used with Auto-Cut 100 Power Supply)
Ambient
Temperature 104° F
40° C
Duty Cycle 100% @ 100 Amps
Maximum Current 100 Amps
Voltage (V
peak
) 500V
Arc Striking Voltage 10kV
Current
Up to 100 Amps, DC,
Straight Polarity (See Note)
XT TM -301 Torch Gas Specifications
Plasma Gases:
Compressed Air, Oxygen,
Nitrogen, H35
Shield Gases:
Compressed Air, Oxygen,
Nitrogen, Water
Operating Pressure
125 psi ± 10 psi
8.6 bar ± 0.7 bar
Maximum Input Pressure 135 psi / 9.3 bar
Gas flow 10 - 300 scfh
Power Supply used with: Auto-Cut 100