Verify that the driver works – Rockwell Automation 1769-ADN DeviceNet Modules Installation Instructions Manuel d'utilisation
Page 43
Advertising
Rockwell Automation Publication DNET-IN001B-EN-P - January 2012
43
Configure a Workstation to Operate on a DeviceNet Network Chapter 3
Verify that the Driver Works
Complete these steps to verify that the driver works.
1.
Open the Configure Drivers dialog box and verify that the driver is
running.
2.
Close the Configure Drivers dialog box.
3.
Open the RSWho dialog box.
4.
Double-click the driver to see the network.
Advertising
Ce manuel est liée aux produits suivants: