Load firmware through a usb port – Rockwell Automation 1769-ADN DeviceNet Modules Installation Instructions Manuel d'utilisation
Page 22
Advertising

22
Rockwell Automation Publication DNET-IN001B-EN-P - January 2012
Chapter 1 Install a 1756 DeviceNet Communication Module
The RSLinx Workstation organizer appears.
Your 1756-EN2T module appears under two different drivers, a virtual
chassis and the USB port.
Load Firmware through a USB Port
IMPORTANT
Do not simultaneously load firmware for more than one module at a
time through a USB port. If you do, one or more of the firmware loads
may fail in the middle of the upgrade.
Virtual Chassis Driver
USB Port Driver
Advertising
Ce manuel est liée aux produits suivants: