Rockwell Automation 1769-ADN DeviceNet Modules Installation Instructions - Manuel (Page 42)

42 Rockwell Automation Publication DNET-IN001B-EN-P - January 2012
Chapter 3 Configure a Workstation to Operate on a DeviceNet Network
2. From the Available Driver Types pull-down menu, choose DeviceNet
Drivers.
3. Click Add New and name the new driver.
4. Click OK.
5. Configure the driver.
The configuration screens may differ for each driver.
Driver Configuration
If unused, use the default
Node Address of 62 and set
your Network Baud Rate.