Sr+ control for pioneer plasma displays, The system setup menu 09 – Pioneer VSX-C501-S Manuel d'utilisation

Page 40

Advertising

The System Setup menu

Dual mono setting

Specifies how dual mono encoded Dolby Digital or DTS
soundtracks should be played:

•

ch1

– Only channel 1 is played

•

ch2

– Only channel 2 is played

•

L. c1 R. c2

– Both channels are played through the

front speakers

Note

• On the

ch1

and

ch2

settings the sound comes only

from the center speaker (or from the front speakers if

CENTER ––

was selected for the center speaker

setting.

• This setting works only with dual mono encoded

Dolby Digital or DTS soundtracks. See the disc
packaging for channel information.

Input attenuator setting

When playing analog sources, if the sound is distorting
(or when you see the

OVER

indicator light in the display),

switch on the input attenuator. Each input has its own
attenuator setting; set it for the currently selected input.

•

IN. ATT OFF

– Input attenuator is off

•

IN. ATT ON

– Input attenuator is on

Coaxial input setting

Specifies which receiver function the coaxial input
(

DVD(STB) COAX

jack) relates to:

•

COAX DVD

– Assigns the input to the receiver’s

DVD

function

•

COAX STB

– Assigns the input to the receiver’s

STB

function (the optical input is automatically set to

DVD

)

Note

• See also

Connecting your equipment

on page 9.

Optical input setting

Specifies which receiver function the optical input
(

STB(DVD) OPT1

jack) relates to:

•

OPT1 STB

– Assigns the input to the receiver’s

STB

function

•

OPT1 DVD

– Assigns the input to the receiver’s

DVD

function (the coaxial input is automatically set to

STB

)

Note

• See also

Connecting your equipment

on page 9.

• You cannot assign the other optical input (

DVR/TV

OPT2

jack).

AV Direct setting

The AV Direct mode allows the receiver to pass audio/
video signals arriving at one of the AV connector inputs
to the other AV connector outputs without the sound
being routed to the speakers. (See also

The AV Direct

mode

on page 10.) In AV Direct mode, the current input

is shown (at reduced brightness) in the front panel
display.

The AV Direct setting determines whether the receiver
switches to AV Direct mode automatically, or only when
you switch it manually.

•

AVD MANU

– Allows you to switch between standby

and AV Direct mode using the

AV DIRECT

button on

the remote control.

•

AVD AUTO

– Automatically switches to AV Direct

mode when an incoming signal is sensed by the
receiver in standby.

Auto input select setting

Specifies how the receiver responds when it senses that
a component connected to one of the SCART AV
connectors is switched on.

•

SEL MANU

– You must select the receiver’s input

manually using the front panel

INPUT SELECTOR

, or

the input buttons on the remote control.

•

SEL AUTO

– When a component connected to one of

the SCART AV connectors (except the TV) is switched
on, the receiver automatically switches to that input.

Note

• When set to

AVD AUTO

, if a connected component

is switched on, you cannot switch this receiver into
standby (

INPUT ON

appears in the display).

• You can’t use the sleep timer when the AV Direct

setting is

AVD AUTO

(see also

Using the sleep timer

on page 35).

• When AV Direct is on, EON is switched off (see also

Enhanced Other Network (EON)

on page 34).

SR+ mode for Pioneer plasma displays

Make the following settings if you have connected a
Pioneer plasma display to this receiver using the
supplied SR+ cable.