Pioneer VSX-C501-S - Manuel (Page 35)

Using other functions
35
En
English
08
Chapter 8
Using other functions
Selecting the input signal type
The DVD , STB , DVR/TV and FRONT inputs all have both
analog and digital jacks. You can select the type of signal
to be used in each case. The
DVD input has a third
option; multichannel analog input.
The input signal type for the current input is indicated in
the display:
ANA (analog), DIG (digital), and DVD 5.1ch
(multichannel analog).
The default AUTO setting is usually sufficient, letting the
receiver decide the most suitable signal type. However, if
you want to record from the
VIDEO IN/OUT AV
connector or the DVR/TV IN/OUT AV connector, then
you should set the input signal type to analog.
• Press SIGNAL SELECT to change the input signal
type.
• SEL. AUTO – (default setting) Uses digital if available,
otherwise analog.
• SEL. ANA – Uses the analog signal
• SEL. DIG – Uses the digital signal
• SEL. 5.1ch – Uses the multichannel analog signal
(only selectable for the DVD input)
Note
• When the VIDEO or FM/AM inputs are used, the
display always shows ANA (analog).
• When DVD 5.1ch (multichannel analog) is selected,
only the volume and channel level settings are
applied to the sound; you cannot use the Stereo,
Surround, Advanced Surround modes, Sound Modes
and dialog enhancement. (If you want to use these,
select
DIG (digital) as the input signal type.
• MCACC setup is not usable when DVD 5.1ch is
selected. Switch to one of the other settings if you
want to use MCACC setup.
Using the sleep timer
The sleep timer automatically puts the receiver into
standby after the specified period of time.
• Press SLEEP (RECEIVER + AV DIRECT) to set the
sleep timer.
Press repeatedly to select between:
• 90 MIN. – Switches to standby after 90 minutes
• 60 MIN. – Switches to standby after one hour
• 30 MIN. – Switches to standby after 30 minutes
The sleep timer indicator ( ) lights when the sleep timer
has been set.
Note
• The sleep timer is cancelled if you switch on the AV
Direct function. See also The AV Direct mode on
page 10 and AV Direct setting on page 40.
Tip
• Press the SLEEP ( RECEIVER + AV DIRECT ) button
once to view how much time is left on the timer
before shutdown. Each press after that will cycle
through the possible sleep time lengths.
INPUT VIDEO FRONT FM/AM
SURROUND
ADVANCED
SURROUND
SOUND MODE SIGNAL
SELECT DIALOG
AUTO STEREO
LEVEL TEST TONE CH SELECT
MUTE
MASTER
VOLUME
DTV MENU
TOP MENU T.EDIT
MENU
ROOM
SETUP
TUNE
ST ST
SYSTEM SETUP
SOURCE RECEIVER
SLEEP
RECEIVER
AV DIRECT
INPUT
DVD
VIDEO
STB
FRONT FM/AM
DVR/TV
SURROUND
ADVANCED
SURROUND
AUTO STEREO
LEVEL TEST TONE CH SELECT
vsx-c501(WY).book 35 ページ ２００３年５月２２日 木曜日 午前１０時２９分