Pioneer VSX-C501-S - Manuel (Page 36)

Using other functions 08
36
En
Using the SR+ mode with a Pioneer
plasma display
When connected using the supplied SR+ cable, a
number of features become available to make using this
receiver with your Pioneer plasma display even easier.
These features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also Using this receiver with a Pioneer plasma display
on page 19 for connecting up, and SR+ mode for Pioneer
plasma displays on page 40 for setting up the receiver.
1 Make sure that the plasma display and this
receiver are switched on and that they are
connected with the SR+ cable.
See Using this receiver with a Pioneer plasma display on
page 19 for more on connecting these components.
2 To switch SR+ mode on/off, press RECEIVER and
TV CONTROL INPUT simultaneously.
The front panel display shows the new setting; SR+ ON or
SR+ OFF .
Note
• The automatic volume muting feature is enabled
separately; see SR+ mode for Pioneer plasma displays
on page 40. (You can also use the System Setup
menu to switch the SR+ mode of the receiver.)
• If you disconnect the SR+ cable or switch the plasma
display off while SR+ is on, the receiver will
automatically revert to
SR+ OFF .
Caution
• When the receiver is connected to a plasma display
using an SR+ cable, if the plasma display is switched
off, you cannot use the remote to control the receiver.
Resetting the system
Use this feature to reset the system to its factory default
settings.
1 Press RECEIVER to switch the receiver into
standby.
2 Press MCACC SETUP and SYSTEM SETUP at the
same time.
The display prompts you to confirm.
3 Within 5 seconds, press LEVEL –.
The display shows OK? .
4 Within 5 seconds, press LEVEL +.
The display shows OK and the receiver should now be
reset.
Note
• If the receiver is disconnected from the power outlet
for more than a month it will reset to the default
settings.
• The above reset doesn’t affect the presets that you
have programmed into the remote control (see Using
the remote control with other components on
page 42).
SOURCE RECEIVER
SLEEP
RECEIVER
AV DIRECT
INPUT
DVD
VIDEO
STB
FRONT FM/AM
DVR/TV
SURROUND
ADVANCED
SURROUND
SOUND MODE SIGNAL
SELECT DIALOG
AUTO STEREO
LEVEL TEST TONE CH SELECT
MUTE
MASTER
VOLUME
DTV MENU
TOP MENU T.EDIT
MENU
ROOM
SETUP
TUNE
ST ST
SYSTEM
SETUP
ENTER
vsx-c501(WY).book 36 ページ ２００３年５月２２日 木曜日 午前１０時２９分