Pioneer VSX-C501-S - Manuel (Page 11)

Connecting your equipment
11
En
English
03
Connecting a DVD player
Follow the instructions below, referring to the diagram, to
connect a DVD player.
If your DVD player has multichannel analog audio
outputs you can connect them to the
AUDIO IN (5.1CH)
jacks on this receiver. Connecting these can be useful as
some discs do not allow digital output from the player. It
can also be useful if you want to use an external digital
decoder unit.
1 Use a SCART cable to connect the DVD IN AV
connector to an AV connector on your DVD player.
2 If your DVD player has multichannel analog
outputs, connect these to the SURROUND L / R,
CENTER and SUBWOOFER jacks on this receiver.
These connections are shown in 2 in the illustration
below.
3 Use a coaxial digital audio cable to connect the
DVD(STB) COAX jack to a coaxial digital audio
output on your DVD player.
This connection carries stereo and multichannel digital
audio.
If your DVD player doesn’t have a coaxial digital audio out
jack, it is possible to use an optical connection to the
STB(DVD) OPT1 jack. However, since by default this
input is assigned to the STB input, you will need to
reassign it to the DVD input before you can use it. After
connecting up everything else see Optical input setting
on page 40 for how to do this.
Note
• To listen to multichannel analog audio you’ll need to
switch the input signal selector to DVD 5.1ch
(multichannel analog). See Selecting the input signal
type on page 35.
.
COAX
SUB WOOFER
L
R
CENTER SURROUND
CONTROL
AV CONNECTOR
AC IN
AUDIO IN (5.1CH) STB IN DVD IN
VIDEO IN/OUT DVR/TV IN/OUT
FM UNBAL 75 Ω
AM LOOP
ANTENNA
IN
OUT
SUB
WOOFER
OUT
STB (DVD)
OPT1 DVR/TV
OPT2
DVD (STB)
DIGITAL IN
SPEAKERS FRONT SURROUND R CENTER SURROUND BACK L R L
+
–
FRONT SURR. SUB W.
CENTER
L
R
VIDEO
VSX-C501
DVD player
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
1 3 2
AV CONNECTOR OUT
vsx-c501(WY).book 11 ページ ２００３年５月２２日 木曜日 午前１０時２９分