Pioneer VSX-C501-S - Manuel (Page 24)

Controls and displays 04
24
En
ADVANCED SURROUND (page 29)
Use to select an ADVANCED SURROUND mode for
the current source.
SOUND MODE (page 29)
Use to select a SOUND MODE for the current
source.
DIALOG (page 29)
Press to switch on/off DIALOG (dialog
enhancement).
10 MUTE
Press to mute all output. Press again (or adjust the
volume using the
MASTER VOLUME control) to restore
the sound.
11 SIGNAL SELECT (page 35)
Press to select the type of input signal for the current
input (
DVD , STB , DVR/TV and FRONT ).
12 MASTER VOLUME
Use to adjust the volume.
13 MCACC SETUP (page 25)
Press to start MCACC (Multichannel Acoustic
Calibration) setup.
14 SYSTEM SETUP (page 38)
Press to access the SYSTEM SETUP menu to make
detailed receiver settings.
15 Cursor keys and ENTER
Use to navigate menus and select options/execute
commands.
16 SBch MODE (page 30)
Use to select the surround back channel mode.
17 DIMMER
First press RECEIVER , then press DIMMER repeatedly to
change the brightness/switch off the front panel display.
The display will light brightly for about two seconds when
you operate the receiver with the display off or dimmed.
(Note that the master volume indicator always remains
lit, even when the rest of the display is off.)
18 Playback controls (page 45)
Playback controls for external components, such as DVD
and CD players.
Functions printed in blue control the built-in tuner; other
functions control other external equipment.
19 Number buttons (page 45)
Use for numerical input of track numbers, radio
frequencies, and so on.
20 CHANNEL +/– (page 45)
Use to change channels on a satellite receiver, cable box,
VCR or DVR.
21 TV CONTROL buttons (page 42)
Use to control your TV (after setting up the remote control
to work with your TV).
Operating range of the remote control
The remote control may not work properly if:
• There are obstacles between the remote control and
the receiver's remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
30
30
7m
vsx-c501(WY).book 24 ページ ２００３年５月２２日 木曜日 午前１０時２９分