John Wood Commercial Power Vent - AJWSM - Manuel

OWNER INSTRUCTIONS, DO NOT DESTROY
DO NOT DESTROY. PLEASE READ CAREFULLY AND KEEP IN
A SAFE PLACE ON JOB SITE FOR FUTURE REFERENCE.
T HE FOLLOWING POWER VENT KITS HAVE BEEN APPROVED FOR J OHN W OOD S IGNATURE S ERIES AND A MERICAN W ATER H EATER
C
OMMERCIAL
G
AS WATER HEATER MODELS
.
GSW AWHC
VENT
DIAMETER
MAX.
EQUIVALENT
VENT (FEET)
VENT
DIAMETER
MAX.
EQUIVALENT
VENT (FEET)
VENT
DIAMETER
MAX.
EQUIVALENT
VENT (FEET)
JWS75-125(N,P) DCG3-75T125-5(N,P) 4" 100
(A)JWS80-199(N,P) DCG3-80T199-6(N,P) 4" 60 6" 100 6" 100
(A)JWS100-199(N,P) DCG3-100T199-6(N,P) 4" 60 6" 100 6" 100
(A)JWS80-250(N,P) DCG3-80T250-6(N,P) 6" 100 6" 100
(A)JWS100-270(N,P) DCG3-100T270-6(N,P) 6" 100 6" 100
(A)JWS75-300(N,P) DCG3-75T300-7(N,P) 6" 100
(A)JWS75-360(N,P) DCG3-75T360-8(N,P) 6" 100
(A)JWS75-399(N,P) DCG3-80T399-8(N,P) 6" 100
WATER HEATER MODELS
American Kit No. 6910847
John Wood Kit No. 59028
Tjernlund Kit No.
GPAK1T-GSW
American Kit No. 6910848
John Wood Kit No. 59029
Tjernlund Kit No.
GPAK2T-GSW
American Kit No. 6910847
John Wood Kit No. 59028
Tjernlund Kit No.
GPAK1T-GSW
TABLE OF MAXIMUM ALLOWABLE VENT LENGTHS
PART NO. 8504126 REV. A (07-03)
Recognize this symbol as an indication of important Safety Information!
NOTE: FLUE GAS TEMPERATURES MUST NOT EXCEED
600°F AT VENT SYSTEM INLET.
WARNING
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED
SERVICE PERSONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND OPER-
ATION OF THIS UNIT. READ THESE INSTRUCTIONS THOROUGHLY BEFORE
ATTEMPTING INSTALLATION OR OPERATION. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN IMPROPER INSTALLATION, ADJUSTMENT, SER-
VICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE, ELECTRICAL SHOCK,
CARBON MONOXIDE POISONING, EXPLOSION, OR PERSONAL INJURY OR
PROPERTY DAMAGE.
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com