Nautilus T514 - Manuel (Page 36)

4. Carefully tilt the base frame of the folded treadmill a small distance back on the transport wheels.
Do not use the Console or handlebars to lift or move the treadmill. Damage to the treadmill can occur.
Keep clear of the movement path of the lifted walking deck.
5. Roll the machine on the transport wheels to its new location.
NOTICE: Move the machine carefully so that it does not hit other objects. This can damage the Console operation.
6. Prior to use, refer to the “Unfolding the Treadmill” procedure in this manual.
Troubleshooting
Condition/Problem Things to Check Solution
Unit does not power up/turn on/start Outlet Make sure AC outlet functions correctly.
To verify this, plugging another object
(ex: lamp) into the outlet. If outlet is
connected to a light switch, check
to make sure it is on. If outlet is not
functioning find a working outlet.
Power cord not plugged in Make sure the power cord is firmly
plugged into a non-GFI wall socket.
Power switch turned off Make sure the power switch at the front
of the unit is in the “ON” position.
Safety key not plugged in Plug Safety Key into Console. (See
Emergency Stop Procedure in the
Important Safety Instructions section of
this manual.)
Speed display is not accurate Display set to wrong unit of measure.
(English/Metric)
Change display to show correct units.
Unit operates but Contact HR not
displayed or E4 error occurs
Safety key Remove Safety Key. Plug Safety Key into
Console.
36 36 36