Panasonic AJ-B95 - Manuel (Page 49)

The underlining indicates the factory setting.
770 CUE INSERT
0000
0001
OFF
ON
This selects whether to record signals onto the cue track in the
audio insert mode
0: No signals are recorded on the cue track, and the already
recorded signals are left on the track.
1: Signals are recorded on the cue track.
771 AUDIO SLOW
0000
0001
0002
PCM
CUE
A-CUE
This selects the audio output mode during slow playback.
0: PCM mode
PCM sound is output at speeds from –0.43a to +1a, and the
cue sound is output at all other speeds.
1: CUE mode
PCM sound is output at the FWD 1a speed, and the cue sound
is output at all other speeds.
2: ALL CUE mode
Cue sound is output at all speeds including the FWD 1a speed.
772 AUTO MONI
0000
0001
V1+V2
AUTO
This selects the signal which is to be output to the speakers or
headphones.
0: The signal complies with the AUDIO MONITOR SELECT switch
setting.
1: The signals of the VTR selected by the VTR1/VTR2 button are
output.
In the VTR1/VTR2 simultaneous operation mode, the VTR1
signals are output to the left channel and the VTR2 signals are
output to the right channel.
<Notes>
O
The setting is fixed at V1+V2 when the OPERATION MODE
switch is set to SEPARATE.
O
The setting is fixed at V1+V2 when the CONTROL switch is set
to REMOTE or EXT VTR.
[
[ [
[
773 PB AUDIO SEL
0000
0001 TR1/2
TR3/4
This selects the playback tracks when the ANALOG AUDIO OUT
switch is set to “V1•V2.”
(This setting takes effect in the 50 Mbps mode.)
0: The sound recorded on tracks 1 and 2 is played back.
1: The sound recorded on tracks 3 and 4 is played back.
[ [
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
V
T
R
1
V
T
R
2
49
Setup menus
AUDIO menu