Panasonic AJ-B95 - Manuel (Page 44)

The underlining indicates the factory setting.
601 OUT VSYNC
0000
0001 N-VF
VF
This selects whether to float the video signal phase at the V sync
position of the video signals in order to align it with the input in the
E-E mode or during recording or editing.
0: The phase is floated.
1: The phase is not floated.
602 V-MUTE SEL
0000
0001 N-MUTE
LOW_RF
This selects whether to mute the video output signals when a
blank has been detected on the tape during playback.
0: No muting (screen is frozen).
1: Muting (screen is turned black).
603 CC (F1) BLANK
0000
0001 BLANK
THRU
This selects ON or OFF for the closed caption signal of the first
field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
<Note>
In the 625i mode, this setup menu item does not appear.
604 CC (F2) BLANK
0000
0001 BLANK
THRU
This selects ON or OFF for the closed caption signal of the
second field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
<Note>
In the 625i mode, this setup menu item does not appear.
605 FREEZE SEL
0000
0001 FIELD
FRAME
This selects the freeze status of the still pictures.
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze is set, the tape is played back in the slow
mode in 1-frame increments even during slow playback.
611 INPUT C KILL
0000
0001
B/W
AUTO
This selects the color killer processing for the video input signals.
0: The video input signals are forcibly subjected to monochrome
processing.
1: The video input signals are automatically processed.
609 EDH
0000
0001 OFF
ON
This selects whether to insert the error information into the serial
output.
0: The error information is not inserted.
1: The error information is inserted.
[ [
[ [
[ [
[ [
[
[ [
610 Pb/Pr IN LV
0000
0001 MII
B-CAM
This selects the analog component input level.
0: M
II level.
1: ß-cam level
<Note>
In the 625i mode, this setup menu item does not appear. [ [
[ [
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
V
T
R
1
V
T
R
2
44
Setup menus
VIDEO menu