Panasonic AJ-B95 - Manuel (Page 36)

The underlining indicates the factory setting.
[ [
303 STD/NON-STD
0000
0001
0002
AUTO
STD
N-STD
This selects the STD or NON-STD to match the composite input
signals.
0: The standard/non-standard signals are automatically identified
and processed.
1: The standard signals are processed. (Forced STD)
2: The non-standard signals are processed. (Forced NON-STD)
<Note>
This operation is not performed in the 625i mode.
304 SERVO REF
0000
0001
AUTO
EXT
This selects the servo synchronizing signals.
0: During recording or editing, the servo is synchronized with the
input signals; during playback, it is synchronized with the REF
signal.
1: The servo is synchronized with the REF signal at all times.
307 EDIT RPLCE3
0000
0001
0002
0003
0000
0001
0002
0003
N-DEF
CH1
CH2
CH1+2
As with setup menu item No.305, this selects the VTR’s channel 3
editing commands ON or OFF in accordance with the analog
audio signals specified by the controller.
0: No setting
1: Setting accords with the analog channel 1 editing commands.
2: Setting accords with the analog channel 2 editing commands.
3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
[
305 EDIT RPLCE1
0000
0001
0002
0003 N-DEF
CH1
CH2
CH1+2
This selects the allocation of the channels using the controller’s
analog audio editing commands when a controller without
functions for digital audio editing is used to edit the digital audio
signals of the VTR.
The VTR’s channel 1 editing commands can be set ON or OFF in
accordance with the analog audio signals specified by the
controller.
0: No setting
1: Setting accords with the analog channel 1 editing commands.
2: Setting accords with the analog channel 2 editing commands.
3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
[
[ [
306 EDIT RPLCE2
0000
0001
0002
0003 N-DEF
CH1
CH2
CH1+2
As with setup menu item No.305, this selects the VTR’s channel 2
editing commands ON or OFF in accordance with the analog
audio signals specified by the controller.
0: No setting
1: Setting accords with the analog channel 1 editing commands.
2: Setting accords with the analog channel 2 editing commands.
3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
[
308 EDIT RPLCE4
N-DEF
CH1
CH2
CH1+2
As with setup menu item No.305, this selects the VTR’s channel 4
editing commands ON or OFF in accordance with the analog
audio signals specified by the controller.
0: No setting
1: Setting accords with the analog channel 1 editing commands.
2: Setting accords with the analog channel 2 editing commands.
3: Setting accords with the analog channel 1 or channel 2 editing
commands.
<Note>
This operation is not performed in the 625i mode.
[
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
V
T
R
1
V
T
R
2
36
Setup menus
EDIT menu