Panasonic AJ-B95 - Manuel (Page 35)

270
The underlining indicates the factory setting.
202 ID SEL
0000
0001 OTHER
DVCPRO
This selects the ID information to be returned to the controller.
0: 20 25H (525i mode) is returned.
1: The DVCPRO’s own ID and F0 33H (525i mode) is returned.
<Note>
This operation is not performed in the 625i mode.
207 STOP BIT
0000
0001 1
2
This selects the RS-232C (EDL) stop bit.
0: 1 bit
1: 2 bits
[
205 BAUD RATE 0000
0001
0002
0003
0004 1200
2400
4800
9600
19200
This selects the RS-232C (EDL) transfer (baud) rate.
[
[ [
208 PARITY
0000
0001
0002 NON
ODD
EVEN
This selects the RS-232C (EDL) parity.
0: Parity bit is not used.
1: Parity bit is used with odd parity.
2: Parity bit is used with even parity.
[
FLOW CONTROL
0000
0001 NONE
RTSCTS
This selects the RS-232C (EDL) communication flow control.
0: No flow control using RTS/CTS.
1: Flow control using RTS/CTS.
[
271 EDL FORMAT
0000
0001 AGA850
CMX340
This selects the format in which the EDL is to be dumped.
0: Format which is common with Panasonic’s AG-A850.
1: Format which is common with the CMX340 editing system.
[
206 DATA LENGTH
0000
0001 7
8
This selects the RS-232C (EDL) data length.
0: 7 bits
1: 8 bits
[
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
V
T
R
1
V
T
R
2
35
Setup menus
INTERFACE menu