Panasonic AJ-B95 - Manuel (Page 31)

The underlining indicates the factory setting.
30 MENU LOCK
0000
0001 OFF
ON
This selects the setup menu lock mode.
0: The lock is released (enabling changes to be made).
1: The lock is engaged (prohibiting changes).
70 P.ON LOAD
0000
0001 OFF
ON
This is for establishing the setting that changes the setup menu
settings to the user’s initial settings when the power is turned on.
0: The setup menu settings remain unchanged.
1: The setup menu settings are changed.
11 SYS SC 0000
0127
0255
–127
0
128
This is for adjusting the system phase. The total variable range is
at least ±180 degrees.
–: The phase is advanced.
+: The phase is delayed.
17 SYS H RANGE
0000
0001 FULL
FINE
This selects the SYSTEM H variable range.
0: ±8 µs
1: –2.0 µs to +2.7 µs
13 VIDEO PHASE 0000
0032
0064
–32
0
32
This is for adjusting the video signal phase (in 148 ns steps).
–: The phase is advanced.
+: The phase is delayed.
18 SYS H OFFSET
0000
0001
0002
0003
0004
0005
0006 –3
–2
–1
0
1
2
3
This selects the SYSTEM H center position.
0: –13.4 µs
1: –8.96 µs
2: –4.52 µs
3: 0 µs
4: +4.52 µs
5: +8.96 µs
6: +13.4 µs
16 AV PHASE 0000
0090
0180
–90
0
90
This is for adjusting the phase of the audio output with respect to
the video output signals (in 20.8 µs steps).
–: The audio output phase is advanced ahead of the video output.
+: The audio output phase is delayed from the video output.
[ [
[ [
[
[
[ [
[ [
[ [
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
V
T
R
1
V
T
R
2
31
Setup menus
SYSTEM menu