Sony AVD-C700ES - Manuel (Page 62)

62 US
You can operate the receiver and other units
with the remote. A display shows the current
unit being operated. With Cursor key, you can
easily select a function, disc, or number.
About the remote’s display
The remote’s display shows the unit being
operated. It also lights up when you press Cursor
key or buttons when the unit is operated.
To select the units you want to
operate.
Press FUNCTION and then move Cursor key
until the desired source appears in the remote’s
display. Push Cursor key when the desired
source appears.
Each time you move Cursor key, the source
changes as follows.
DVD
t VIDEO1 t VIDEO2 t TV/SAT t
MD/DAT t TUNER t M1 t M2
Notes
• When you operate the receiver, select “DVD,”
“TUNER,” “M1,” or “M2.”
• To operate a TV, VCR, satellite receiver, or other unit
with the remote, you need to set the manufacturer
code for each unit. To set manufacturer codes, see
“Controlling Other Units with the Supplied Remote”
on page 65.
Tip
You can also operate the TV with the remote in any
selection. For details of TV operation, see “Controlling
TVs with the remote” on page 65.
To select a disc by using the
remote’s display
Press DISC and then move Cursor key until the
disc you want appears in the remote’s display.
Push Cursor key when the desired disc appears.
Each time you move Cursor key, the remote’s
display changes to “DISC1 -DISC5” or “D
SKIP.”
To enter the number
Press NUM and move Cursor key until the
number you want to enter appears in the
remote’s display. Then push Cursor key.
Tips
• When you enter the number more than double-digit,
push Cursor key each time you enter the number.
• If you select “TV/SAT” as the function for the
receiver, you can enter a 3-digit number on the
remote’s display.
Other Operations
Using the Remote
FUNCTION
DISC NUM
Cursor key
Display