Radson 4 Zones RF Clock - Manuel (Page 3)

3
IMPORTANT!
Before starting work the installer should carefully read this Installation
& Operation Manual, and make sure all instructions contained therein
are understood and observed.
- The device should be mounted, operated and maintained by
specially trained personnel only. Personnel in the course of training
are only allowed to handle the product under the supervision of an
experienced fitter. Subject to observation of the above terms, the
manufacture shall assume the liability for the equipment as provided
by legal stipulations.
- All instructions in this Installation & Operation manual should be
observed when working with the controller. Any other application
shall not comply with the regulations. The manufacturer shall not be
liable in case of incompetent use of the control. Any modifications
and amendments are not allowed for safety reasons. The
maintenance may be performed by service shops approved by the
manufacturer only.
- The functionality of the controller depends on the model and
equipment. This installation leaflet is part of the product and has to
be obtained.
APPLICATION
- The RF clock is developed to control and manage by program
function the working mode of your panel heaters.
- The controllers have been designed for use in residential rooms,
office spaces and industrial facilities.
Verify that the installation complies with existing regulations before
operation to ensure proper use of the installation.
SAFETY INSTRUCTIONS
Before starting work disconnect power supply!
- All installation and wiring work related to the thermostat must be
carried out only when de-energized. The appliance should be
connected and commissioned by qualified personnel only. Make sure
to adhere to valid safety regulations.
- The thermostats are neither splash- nor drip-proof. Therefore, they
must be mounted at a dry place.
- Do not interchange the connections of the sensors and the 230V
connections under any circumstances! Interchanging these
connections may result in life endangering electrical hazards or the
destruction of the appliance and the connected sensors and other
appliances.