Hooking up the audio components, Reset switch (47), Ac power cord – Sony MDS-JE530 Manuel d'utilisation
Page 5: Required cords, Jacks (connectors) for connecting audio components
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Hooking Up the Audio Components
Reset switch (47)
AC power cord
Cl
ID
3
3
U2
(A
01
ID
a
Digital equipment ivitb a DIGITAL OUT connector only
**Digital equipment with both DIGITAL IN and OUT connectors
Required cords
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
color-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
White (L)
Red (R)
White (L)
Red (R)
Optical cables (3) (only one supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cables.
Things you should keep in mind while
hooking up the system
• Turn off the power to all components before making
any connections.
• Do not connect any AC power cord until all the
connections are completed.
• Be sure the connections are firm to prevent hum and
noise.
Jacks (connectors) for connecting audio
components
Connect
To the
Amplifiers
LINE (ANALOG) IN/OUT jacks
CD players or DBS tuners
DIGITAL IN connector
Digital amplifiers, DAT decks, DIGITAL IN/OUT connectors
or another MD deck