Sony MDS-JE530 - Manuel (Page 16)

Recording on an MD
9
to
n
0
3
(O
o
3
2
o
VI
6 If necessary, locate the point on the MD to start
recording from.
If \’ou want to record on a nev\' MD or start recording
from the end of the recorded portion, go to step 7,
To record over from the beginning of an existing MD
track
Turn AMS (or press /► ► ! repeatedly) until the
number of the track to he recorded over appears.
To record over from the middle of an MD track
Turn AMS (or press /► ► ! repeatedly) until the
number of the track to be recorded over appears, then
press C> to start playback. Press II at the point you
want to start recording from.
7 Press REC #.
The deck changes to recording pause.
8 If necessary, adjust the recording level.
For details, see "Adjusting the Recording Level" on
page 17.
9 Press C> or II.
Recording starts.
10
start playing the program source.
Operations you may want to do during recording
To Press
Stop recording ■
Pause recording II
Resume recording after pausing O or 11
Eject the MD = EJECT after stopping
recording
When you pause recording
The track number increases by one. For example, if you
paused recording while recording track 4, the track
number will be 5 when you resume recording.
To prevent accidental erasure of the recorded
material
To make it impossible to record on an MD, slide the
record-protect tab in the direction of the arrow (see
illustration below) to open the slot. To enable recording,
close the slot.
9 To play the tracks you just recorded
Press O immediately after stopping recording.
The deck starts to play from the first track of the material just
recorded.
To play from the first track of the MD after recording
1 Press ■ again after stopping recording.
2 Press [>.
The deck starts to play from the first track of the MD.
Notes
• If you switch REC MODE during recording or recording pause,
recording stops.
• Monaural mode allows you to record about twice as much
' material as stereo.
• Even if you set REC MODE to MONO, the monitor signal
during recording does not become monaural.
• You can't record over existing material when Shuffle Play (page
27) or Program Play (page 27) has been selected. "Impossible"
appears in the display at this time.
IG”-