Sony MDS-JE530 - Manuel (Page 41)

Fade In and Fade Out
Finely controlling the pitch (Fine Control
Function)
You can fine control the playback speed in 0.1%
increments from -98.5% to +12.5%.
1 While the deck is playing, press MENU/NO twice.
"Setup Menu" appears in the display.
2
3
Turn AMS (or press !◄◄/►►) repeatedly) until
"Pfine" appears, then press AMS or YES.
Turn AMS (or press /►►! repeatedly) until the
desired value appears, then press AMS or YES.
4 Press MENU/NO.
Notes
• The playback sound drops out momentarily when you change
the fine control value.
• The fine control value reverts to "0%" (factory setting) when
you turn off the deck or eject the MD.
• The step and fine control values are linked; changing one value
also changes the other.
You can use Fade-in Play to gradually increase the signal
level to the LINE (ANALOG) OUT jacks and the PHONES
jack at the start of playback. Eade-out Play gradually
decreases the signal level at the end of playback.
Eade-in Recording gradually increases the signal level at
the start of recording. Eade-out Recording gradually
decreases the signal level at the end of recording.
FADER
JO. ,
© dp
1 o o
> o o
ooo
ooo
ooo
oOo
O C D O
(3D O)
CHZD0
FADER
QDQ
® @ ^
®(E3 pj
Notes
• The level of the signal output from the DIGITAL OUT
connector does not change during Fade-in Play nor Fade-out
Play.
• Fade-in Recording and Fade-out Recording have no effect
during digital recording.
Fade-in Play and Fade-in Recording
During play pause (for Fade-in Play) or recording
pause (for Fade-in Recording), press FADER.
•4 flashes in the display and the deck performs Eade-in
Play or Eade-in Recording for five seconds (factory
setting) until the counter reaches "0.0s."
T1
c
3
n o’
3
VI
41