Sony MDS-JE530 - Manuel (Page 25)

Playing a track by entering the track
number [x]
Press the number button(s) to enter the track number
of the track you want to play.
To enter a track number over 10
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To play track number 30, press >10, then 3 and 10/0.
• To plav track number 108, press >10, then 1, 10/0, and 8.
9 If you enter a track number while the deck is stopped or
paused
The deck will still be stopped or paused at the beginning of the
track.
Locating a Particular Point
in a Track
You can locate a particular point in a track during plav' or
play pause.
Locating a point while monitoring the
sound
Press down during play.
You will hear intermittent playback as the disc goes
forward or in reverse. When you reach the point, release
the button.
Notes
• If the disc reaches the end while you're pressing ► ► , the deck
stops.
• Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed.
Locating a point by observing the time
indication
Press down during play pause.
The elapsed playing time of the track appears in the
display. When you reach the point, release the button.
■ No sound isx)utput during this time.
Q When Over appears in the display
The disc has reached the end while you're pressing ► ► . Turn
AMS counterclockwise (or press ) or press to go back.
u
<<_
s'
tfi
s
O
vt
25^