Sony MDS-JE530 - Manuel (Page 20)

30
ID
n
0
3
(O
0
3
s
o
VI
Marking Track Numbers While Recording
(Track Marking)
9 Additional information on Automatic Track Marking
• U'hon avoiding Iroiii n CD plaw'i' or MD dock connoctod to tlio
DICITAI- IN connector, the entire material niav be recorded as
a single track in the following cases:
— When \ ou consecutiw'K' record the same track two or more
time using single-track repeat pla\-.
— When \ ou consecutivelx' record two or more tracks ivith tlie
same track number but from different CDs or MDs.
— When YOU record tracks from certain CD or multi-disc
players.
Also, if the source is an MD, a track number may not be
marked for tracks less than four seconds long.
• When recording from a component connected to the LINE
(ANALOG) IN jacks u'ith "T.Mark Off" selected or when
recording from a DAT deck or DBS tuner connected to the
DIGITAL IN connector, the entire material may be recorded as
a single track.
• When recording from a DAT cieck or DBS tuner connected to
the DIGITAL IN connector, the deck will mark a track number
whenex’er the sampling frequency of the input signal changes,
regardless of the track marking parameter setting ("T.Mark
Lsyn" or "T.Mark Off").
Q You can mark track numbers even after recording has
finished
See "Diviciing Tracks" on page 33.
Note
If you turn off the deck or disconnect the AC power cord, the
deck will store the last settings ("T.Mark Lsyn" or "T.Mark Off"
and the trigger level) and recall them the next time you turn on
the deck. ^
Starting Recording With Six
Seconds of Prestored Audio
Data
(Time Machine Recording)
VVhonc'w'r the deck is in recording pause, the deck's
huffer memory continuonslv stores the latest six seconds
worth of auefio data. When von press AMS (or T.REC),
the recording then starts with the data in the buffer
memory. Time Machine Recording thus allow's you to
¿rvoid missing the beginning of material recorded lir e
from an FM or satellite broadcast.
AMS
1 Do steps 1 to 7 of "Recording on an MD" on pages
15 and 16.
The deck changes to recording pause.
2 start playing the program source.
3 Press AMS (or T.REC) at the point where you want
to start recording.
Recording starts with the six seconds of presfored data
in the buffer memory, then continues recording via the
buffer memory thereafter.
To stop Time Machine Recording
Press ■ .
Note
The storage of data in the buffer memory starts from the moment
the deck changes to recording pause. Thus, if you start recording
less than six seconds after changing to recording pause, less than
six seconds worth of data will be recorded from the buffer
memory. The same is true if the program source had been
playing for less than six seconds at the time you start recording.
2 0 ' -