Specifications, Specifications troubleshooting (cont’d), Amplifier – Teac SL-D800BT Manuel d'utilisation

Page 34: Cd player, Bluetooth function, Tuner, Speakers, Radio

Advertising
background image

Amplifier

Output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W

Frequency response . . . . . . . . . . . . . . . . . . . . . . .50 Hz to 20 kHz

CD player

Playable disc types. . . . . . . . . . . . . . . . . . . . . . . CD, CD-R, CD-RW

Frequency response . . . . . . . . . . . . . . . . . . . . . . .20 Hz to 20 kHz

Signal to noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . 70 dB or more

Bluetooth function

Bluetooth version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2DP, AVRCP

Codec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SBC

Class . . . . . .2 (maximum reception distance of about 10 m)

Tuner

Frequency range (FM) . . . . . . . . . . . . . 87.5 MHz to 108.0 MHz

Frequency range (AM) . . . . . . . . . . . . . . . . 530 kHz to 1710 kHz

Speakers

Enclosure type . . . . . . . . . . . . . . . . . . . . . . . Bass reflex (rear port)

Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-inch

Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ω

Specifications

Troubleshooting (cont’d)

Radio

A station cannot be received. The reception is poor.

e

Tune in the station properly.

e

If FM broadcast reception is poor, try relocating the FM
antenna.

e

If AM broadcast reception is poor, try changing the
orientation of the AM antenna.

e

If a TV is near the unit, turn the TV off.

FM stereo broadcasts become mono.

e

Press the FM MODE button to select stereo.

e

The signal from the station might be poor. Adjust the
position of the FM antenna.

Since this unit uses a microcontroller, external noise
and other interference can cause the unit to malfunc-
tion. If this should occur, unplug the power cord from
the outlet and wait for about 20 minutes. Then plug
the power cord in and try the operation again.

34

Advertising