Cd player, Mp3/wma files, Bluetooth function – Teac SL-D800BT Manuel d'utilisation

Page 33

Advertising
background image

CD player

Playback is not possible.

e

If the disc is upside down, reload it with the labeled
side up.

e

If the disc is dirty, wipe it clean.

e

Discs that do not have any recordings on them or
that have not been finalized cannot be played back.
Make sure that CD-R/CD-RW discs that you want to
play back have recordings on them and have been
finalized.

e

Depending on disc quality and recording conditions,
playback of some CD-R/CD-RW discs might not be
possible.

e

Programmed playback works with finalized discs only.

The sound skips.

e

Vibrations will cause skipping. Place this unit in a sta-
ble location.

e

If the disc is dirty, wipe it clean.

e

Do not play any disc that is warped, deformed or
damaged.

MP3/WMA files

Playback is not possible.

e

Check the file format. MP3 files are recognized by
the “.mp3” file extension and WMA files by the “.wma”
extension.

e

The MP3/WMA file might be damaged.

e

Confirm that the file format is one that this unit can
play back (page 7).

Bluetooth function

Pairing fails.

e

Refer to the Bluetooth device’s operation manual.

e

Put this unit into standby and turn the other Bluetooth
device off and on once. Then, try pairing again.

e

Turn off all Bluetooth devices other than the one you
are trying to pair the unit with.

e

After deleting the “SL-D800BT” data from the other
Bluetooth device, try pairing again.

Cannot connect.

e

Confirm that the other Bluetooth device is on and its
Bluetooth function is enabled.

e

Are the unit and the other Bluetooth device too far
apart?
Is there a wall or other obstruction between them?
As much as possible, use them close together in an
environment without obstructions.

e

Put the unit into standby and then on again.

e

Unpair the “SL-D800BT” from the Bluetooth device
and follow the instructions in “Pairing with another
Bluetooth device” on page 26.

The touch pairing reader does not work.

e

Press the Bluetooth function button on the unit. When
using the remote control, press the FUNCTION button
repeatedly until the Bluetooth indicator lights.

e

Check the settings of the other device that you are
using.

The sound skips or there is noise.

e

Is there a wireless LAN, other Bluetooth device, micro-
wave oven or similar electronic equipment nearby?
Keep such devices as far away as possible.

e

Reduce the distance between the other Bluetooth
device and this unit during use.

e

Try moving the other Bluetooth device and this unit.

33

ENGLISH

Advertising